Caution: Contains Glycol Ethers
For new matting prior to sealing use a Neutral pH Cleaner/Degreaser, rinse thoroughly, and let dry. For best results apply the rubber sealant in small sections with a squeegee or PADCO type applicator. Use a paintbrush to fill in any remaining gaps. Application should be in two thin coats, the first at the rate of 600 square feet per gallon. Let the first coat dry at least 30 minutes (dependent on temperature and humidity. Apply the second coat of rubber sealant at a rate of 800 -1000 square feet per gallon and let dry. Allow to cure a minimum of 24 hours before getting wet. Coating will develop full strength in 7 days.